This crochet indigo starburst trivet is a thick round trivet in deep indigo and natural cream with twelve raised starburst spokes, a dense thermal center, and a crisp reverse-single-crochet edge. The construction is designed specifically for the named project rather than adapted from a generic template.
Two strands of cotton are held together throughout. Twelve single crochets establish the center, six increase rounds build a dense 72-stitch disk, and twelve cream overlay spokes are anchored over the indigo body before two firm edging rounds finish the trivet.
Why You’ll Love This Project
The joined rounds, overlay crochet, front-post spokes, reverse single crochet create a distinct trivet with clear checkpoints, practical structure, and strong handmade texture.
Materials
- Approximately 240 yards deep-indigo worsted-weight cotton yarn
- Approximately 160 yards natural-cream worsted-weight cotton yarn
- One locking stitch marker
- Twenty-four rustproof blocking pins
- 5 mm crochet hook
- Yarn needle
- Scissors
- Tape measure
- Blocking mats and rustproof pins
Gauge, Measurements, and Planning
Make a generous swatch in the main stitch. The target gauge is rounds 1–5 measure approximately 4.5 inches across; change hook size if needed before beginning the full runner.
Make and wash a gauge swatch before beginning. Measure only after the swatch is completely dry. If the stitch width differs, change hook size rather than pulling the working yarn tighter. Keep a written count at the end of every section so the finished edges remain balanced and the assembly points line up.
Abbreviations and Special Stitches
- ch: chain
- dc: double crochet
- hdc: half double crochet
- sc: single crochet
- sl st: slip stitch
- st(s): stitch(es)
- BLO: back loop only
- yo: yarn over
Special stitch guidance: Long front-post double crochet: work around the post two rounds below and draw the stitch up to the current height. Starburst spoke: work one long front-post double crochet at each of twelve marked positions.
Before You Begin
- Maintain the stated 12-stitch construction count at every checkpoint.
- Beginning chains count only where explicitly stated.
- Block components before final assembly or border work.
- Use US crochet terminology throughout.
Instructions
Build the Dense Indigo Center
Count carefully and compare the work with the finished measurements.
- Motif Round 1: With two strands of indigo held together, make a magic ring and work 12 sc into it. Join. (12 sts)
- Round 2: Work 2 sc in every stitch. (24 sts)
- Rounds 3–6: Add 12 evenly spaced increases per round, ending Round 6 with 72 stitches.
Mark Twelve Starburst Spokes
Count carefully and compare the work with the finished measurements.
- Round 7: With cream, repeat [5 sc, long front-post dc around the marked Round 5 stitch] twelve times. (72 sts)
- Round 8: With indigo, sc around, working behind every raised spoke. (72 sts)
- Move each spoke marker two stitches clockwise so the next overlay line angles outward.
Complete the Overlay Burst
Count carefully and compare the work with the finished measurements.
- Round 9: With cream, repeat [5 sc, long front-post dc around the marked Round 7 post] twelve times. (72 sts)
- Round 10: With indigo, sc around without increasing. (72 sts)
- Gently spread all twelve spokes so the starburst remains symmetrical.
Finish the Thermal Edge
Count carefully and compare the work with the finished measurements.
- Round 11: With cream, work hdc in each stitch around. (72 sts)
- Round 12: With indigo, reverse sc in every stitch and join invisibly.
- Wet-block to a 9-inch circle without flattening the raised spokes.
Assembly and Shaping
Follow the project-specific assembly sequence for round overlay starburst trivet. Pin or mark every component before joining and keep the finished layout balanced.
Lay every component on a flat surface before joining. Match the marked centers first, then divide each remaining edge into equal sections. Work through both layers with consistent tension and pause after each section to check that the fabric lies flat. This measured approach prevents twisting and keeps decorative details facing the intended direction.
Finishing
- Weave every tail through matching stitches and reverse direction once.
- Inspect all joins, motif anchors, and border corners.
- Block to 9 inches in diameter.
- Allow the runner to dry completely before styling.
For a polished result, weave each tail through several same-color stitches, reverse direction once, and trim only after the fabric has been gently stretched. Block to the listed dimensions without flattening textured stitches. Inspect joins, borders, straps, and decorative pieces before the project is used or gifted.
Helpful Tips
- Use locking markers at every construction checkpoint.
- Record row and motif counts as you work.
- Keep joins and color changes relaxed enough to lie flat.
- Photograph the complete layout before final assembly.
Good lighting and a contrasting stitch marker make counting much easier. If a section looks uneven, compare the current count with the previous checkpoint before continuing. Fixing one missed stitch early is faster than compensating later, and it preserves the measurements used by the assembly instructions.
Frequently Asked Questions
Can I use one strand?
Yes, but use bulky cotton or reduce the hook size so the trivet remains dense.
Why are the spokes leaning?
Move all twelve markers by the same number of stitches before the second overlay round.
Is acrylic safe for hot dishes?
Use cotton because synthetic fibers can soften under high heat.
Conclusion
The finished crochet indigo starburst trivet showcases joined rounds, overlay crochet, front-post spokes, reverse single crochet in a construction that matches the project from foundation through finishing.
Printable Crochet Pattern Card
Project: Crochet Indigo Starburst Trivet
Skill level: Intermediate Hook: 5 mm Yarn: Worsted held double
Finished size: Approximately 9 inches in diameter
Card Materials
- Approximately 240 yards deep-indigo worsted-weight cotton yarn
- Approximately 160 yards natural-cream worsted-weight cotton yarn
- One locking stitch marker
- Twenty-four rustproof blocking pins
- 5 mm crochet hook
- Yarn needle
- Scissors
- Tape measure
- Blocking mats and rustproof pins
Card Instructions
- Build the Dense Indigo Center: Motif Round 1: With two strands of indigo held together, make a magic ring and work 12 sc into it. Join. (12 sts) Round 2: Work 2 sc in every stitch. (24 sts) Rounds 3–6: Add 12 evenly spaced increases per round, ending Round 6 with 72 stitches.
- Mark Twelve Starburst Spokes: Round 7: With cream, repeat [5 sc, long front-post dc around the marked Round 5 stitch] twelve times. (72 sts) Round 8: With indigo, sc around, working behind every raised spoke. (72 sts) Move each spoke marker two stitches clockwise so the next overlay line angles outward.
- Complete the Overlay Burst: Round 9: With cream, repeat [5 sc, long front-post dc around the marked Round 7 post] twelve times. (72 sts) Round 10: With indigo, sc around without increasing. (72 sts) Gently spread all twelve spokes so the starburst remains symmetrical.
- Finish the Thermal Edge: Round 11: With cream, work hdc in each stitch around. (72 sts) Round 12: With indigo, reverse sc in every stitch and join invisibly. Wet-block to a 9-inch circle without flattening the raised spokes.
Finish: Check every count, weave in all ends, block to measurement, and inspect each join.
